Subject practice · Year 11 & 12

Design, Technology and EngineeringPractice questions.
Exam-style feedback.

Q: What Design, Technology and Engineering topics does ATARprepAI cover?

Anything on your syllabus. Every topic and every syllabus point listed on this page starts a quiz on that point alone, and the topic box takes whatever else you type — including a dot point copied straight out of the study design.

Q: Is ATARprepAI free for Design, Technology and Engineering?

Yes. The Free plan is $0 forever, needs no card, and you can try a Design, Technology and Engineering quiz without even making an account. Free accounts get a monthly allowance of freshly generated quizzes; the current numbers are on the pricing page.

Q: Do I need an account to start?

No. You can generate and play a Design, Technology and Engineering quiz signed out. An account adds saved progress across devices, streaks, and a bank of the questions you got wrong.

Q: Which exam boards does it follow?

WACE, VCE, HSC, QCE and SACE. Pick yours and the Design, Technology and Engineering questions use that board's command words and paper structure rather than a generic global syllabus.

Q: Are the questions actually marked, or just answered?

Marked. You attempt the question first, then it comes back scored against the criteria — with the specific line that lost the mark and what would have earned it.

Q: Is this just ChatGPT with a different logo?

No. A chatbot hands you a finished answer. This makes you attempt the question yourself, then marks your work against the exam criteria.

Q: Does it mark against the SACE performance standards?

Yes. Project documentation is marked on investigating, devising, producing and evaluating, with the line limiting each named.

Q: Does it cover the engineering systems content?

Yes — mechanical, electrical and control systems with calculation questions and full working.

Choose a topic, write your answer and see where the marks went. Practise Design, Technology and Engineering with questions and feedback shaped around your exam criteria.

Start a free quiz See how marking works

Free
No card
Powered by OpenAI

Your practice starts here6 starting topics

Choose a starting point.

Pick a topic below, or bring a dot point from your syllabus.

136+

Subjects covered

ATAR exam systems

Cost to start

<15s

To a fresh quiz

The difference

Getting the answer isn't the same as learning.

A chatbot hands you a polished Design, Technology and Engineering answer. An examiner hands you marks. ATARprepAI closes that gap — you attempt the question, it marks your work, and you find out what to fix.

A general AI chatbot

Ask the questionPaste it in and wait.
Get a model answerFluent, confident — and written by someone else.
Move onNothing tested. Nothing marked. Nothing retained.

ATARprepAI

You attempt itExam-style questions you actually answer yourself.
It marks your workCriterion by criterion, with what earned marks and what didn't.
You see where marks were lostAnd — more importantly — why.
You improve and try againWeak spots come back around until they're strong.

Keep ChatGPT for questions. Use ATARprepAI for marks.

What you're actually tested on

What's on the Design, Technology and Engineering syllabus.

Design, Technology and Engineering is the SACE course spanning design, materials and engineering systems. Assessment is project- and skills-based against the performance standards, which reward a documented process — analysis, design decisions, testing and evaluation — rather than a well-finished product on its own.

SACE BoardStage 1 and Stage 2 with school-assessed skills and application tasks and a design and realisation project, plus an external component at Stage 2.

Boards revise their syllabuses — check yours for the current wording. Every point above is a live topic in the quiz builder: tap one to be tested on it.

How it works

Practise the way Design, Technology and Engineering marks are actually earned.

Pick a topic

Choose one of the Design, Technology and Engineering topics above or type your own, then pick your state. WACE, VCE, HSC, QCE and SACE each word their questions differently, and the paper follows yours.

Attempt it yourself

Exam-style questions with the mark allocation showing, so you know how much to write. You answer them — nothing is handed to you.

Get it marked

Your answer comes back marked criterion by criterion in seconds — what you earned, what you half-earned, and what the examiner never saw.

Fix the gap

Rewrite your answer with the feedback beside it, or take a fresh question on the same point, and the topics you keep losing marks on come back around in review.

atarprepai.com/app

The ATARprepAI quiz builder with a year, exam system and subject chosen

A written question in ATARprepAI with a student's answer typed in

An ATARprepAI marking report: the mark, the first correction, and each marking point earned or lost

Under a marked answer: Improve this answer and Try a fresh question

A worked marking example

See where the marks come from.

An example from Design, Technology and Engineering: the answer, the criteria it meets, and the detail it needs next.

Where the marks usually go: Evaluating the testing means naming what it did not cover. A test described as sufficient without that reads as unexamined.

Question 1 of 5 Standard Written 8 marks

Describe how you tested your product against its specifications, and evaluate whether the testing was adequate.

Your answer

I tested the frame by loading it with weights until it started to bend, and it held more than the specification required. This showed the design was strong enough.

AI practice mark 5/8

◑ Partial credit

AI estimate against generated practice marking points. This is not an official examiner result.

Where your marks came from

Describes a test method related to a specification Earned3 of 3 marks
Reports the result against the requirement Earned2 of 2 marks

Where you lost marks

Records specific figures — load applied, deflection measured, at what point Missed0 of 2 marks
Evaluates the testing itself — single trial, static load only, other specifications untested Missed0 of 1 marks

Three mistakes that cost Design, Technology and Engineering marks every year

01
Documenting a process with no decision points. The performance standards assess the reasoning behind the choices.
02
Testing without recording data. A statement that it worked is not evidence.
03
Leaving safety and risk to a generic paragraph rather than tying it to the specific processes used.

More than quizzes

Six ways to study Design, Technology and Engineering, one topic list.

Everything below runs on the same Design, Technology and Engineering material — pick a topic once and revise it whichever way actually sticks for you.

From Methods to Media Studies — if it's on your timetable, it's in here.

Made for here

Design, Technology and Engineering questions that match your exam board.

Command words aren't decoration. NESA's describe and evaluate want different answers, and SCSA and VCAA each keep their own glossary. Pick your system and the Design, Technology and Engineering questions — and the marking — follow that board's language.

Western AustraliaWACE New South WalesHSC VictoriaVCE QueenslandQCE South AustraliaSACE

Questions

Before you ask.

Anything else? support@atarprepai.com

What Design, Technology and Engineering topics does ATARprepAI cover?

Anything on your syllabus. Every topic and every syllabus point listed on this page starts a quiz on that point alone, and the topic box takes whatever else you type — including a dot point copied straight out of the study design.

Is ATARprepAI free for Design, Technology and Engineering?

Yes. The Free plan is $0 forever, needs no card, and you can try a Design, Technology and Engineering quiz without even making an account. Free accounts get a monthly allowance of freshly generated quizzes; the current numbers are on the pricing page.

Do I need an account to start?

No. You can generate and play a Design, Technology and Engineering quiz signed out. An account adds saved progress across devices, streaks, and a bank of the questions you got wrong.

Which exam boards does it follow?

WACE, VCE, HSC, QCE and SACE. Pick yours and the Design, Technology and Engineering questions use that board's command words and paper structure rather than a generic global syllabus.

Are the questions actually marked, or just answered?

Marked. You attempt the question first, then it comes back scored against the criteria — with the specific line that lost the mark and what would have earned it.

Is this just ChatGPT with a different logo?

No. A chatbot hands you a finished answer. This makes you attempt the question yourself, then marks your work against the exam criteria.

Does it mark against the SACE performance standards?

Yes. Project documentation is marked on investigating, devising, producing and evaluating, with the line limiting each named.

Does it cover the engineering systems content?

Yes — mechanical, electrical and control systems with calculation questions and full working.

Your next Design, Technology and Engineering quiz is fifteen seconds away.

Free for Australian Year 11 & 12 students. No card, no account needed to try.

Start a free Design, Technology and Engineering quiz Browse every subject

Free to start
No card
Works on your phone

Design, Technology and EngineeringPractice questions.
Exam-style feedback.

Choose a starting point.

Getting the answer isn't the same as learning.

What's on the Design, Technology and Engineering syllabus.

Design and problem solving

Materials and manufacture

Engineering systems

Testing, evaluation and impact